Condor Mdr2 /11 Manual

Technical Data MDR1 (Euro) Rated insulation voltage Ui 500 V Motor switching capacity (AC 3) Ue=240 V (1) 4,0 kW Electrical life (AC 3) Cycles 1 x 10 5 Mechanical life (Cycles) 5 x 10 5 Max. Electrical cycles (Cycles/h) 120 Max.

Condor Mdr2 11 Bar

Mechanical cycles (Cycles/h) 600 Rated operational current Ie (at 240 V AC) 20 A Bursting strength Pz 35 bar Permissible medium temperature Air - 5.+ 80 °C Permissible medium temperature Water + 70 °C Degree of Protection acc. To EN 60529 IP 44 Conductor cross-section 1. Fine stranded cable 1 x / 2 x 2,5 / 2,5 mm 2 Conductor cross-section 1 rigid cable 1 x / 2 x 2,5 / 2,5 mm 2.

. User’s Guide. Introduction 4 2.Notice 5 3. Parts description (Switches, Connectors, and Buttons) 5 4. Power on.8 5. Operate MENU setup.8 6.Recording.9 7.Playback.12 8. Delete tracks.13 9.

Transfer to and from your computer.13 10.Specification. MDR-2 will select a blank track for you automatically. Whenever a track is recorded, the track number will be fixed and you will not able to change it even if the previous track is deleted or added.

Please use the DC power adaptor of USB type in correct 5V DC specification. Please do not take apart or repair the MDR-2 by yourself. Please bring the MDR-2 back to your retailer or to a local service vendor for repair and assistance. Parts Description (Switches, Connectors, and Buttons). Switches and connectors on the MDR-2 1.

Pressure switch MDR 2. MDR 2/11-EA MDR-2 GBA AAAA 070A090 XAA XXX EA 4. Cover with On/Off lever for manual On/Off (neutral version. We stock the Condor MDR 11 pressure switch and the Condor MDR 21 pressure switch. These switches are two of the most popular Condor pressure switches for. MDR2 DBA AAAA 015A030 XAA XXX EA 1.5 7 1/4' 300 212164 MDR2. Pressure switch MDR 2. PG 11 G conduit 6 200895.

Built-in microphone “L “channel: an omni condenser microphone is installed into the device as “L” channel. Built-in microphone “R” channel: an omni condenser microphone is installed into the device as “R”. Built-in microphone sensitivity selector: H(high) / L(low) / OFF: to select the sensitivity level of built-in microphones, H(high) or L(low). Or switch off the built-in microphone (OFF). Key hold switch ON / OFF: switch “ON” to hold (stop running) the key control, or switch “OFF”. Group number: increase the selection function 4.

Open the battery cover and install two new AA batteries into the MDR-2. The MDR-2 works on both primary batteries (and Alkaline batteries) and Ni-MH rechargeable batteries. To use primary batteries, select to “1.5V”. Operate MENU setup When press key, the LCD will show up all main items of MENU setup, press keys to move to previous or next main items, press keys to interchange to secondary items. Press key again to leave MENU mode. The device allows you to record into the internal flash memory or into an installed SD card memory ( ).

The MDR-2 will change to the SD card memory automatically when SD card is installed. Or you can press to interchange between the memory of the internal flash memory (F) and the SD card. (stop running) the key control. And switch to OFF position to release key control. Record from microphones 1. The MDR-2 is equipped with two built-in microphones (omni directional condenser type).You may adjust high/low sensitivity level of built-in microphones for recording from the Built-in microphone sensitivity selector ).

MDR-2 Record from electric guitar or line-in 1. The MDR-2 allows you to plug in an electric guitar as recording source. Please select to “G” of the Audio-in selector ( ). The electric guitar record level is adjustable via the knob of Volume controller of Audio-in jack ( ) for proper recording sound level.

To produce best recording result, we suggest that you put the MDR-2 at a distance of around 60cm from the sound source, at table height. Please adjust the input volume level to a proper condition. Do not set to the highest volume level on recording, otherwise, the recording sound quality will be distorted. Select the Group and track you want to playback: By pressing to select group number in the range from range 1 to 9. ( And select the track to playback by press button in the range from 1-99( ). The recording format and sample rate of the track you select will show up on the LCD display. Nissan data scan 1.52 cracked.

MDR-2 When you connect USB port with your computer, the computer will detect the MDR-2 as two removable disks (the first disk represents the build-in flash memory; the second disk represents the SD card memory), and you will find folders of Group 1 – 9 in each removable disks. The music you have. Spcifications Recording media: Internal flash memory 128MB, SD memory card (16MB - 2GB), SDHC memory card (4GB) SD card format type: FAT 32 Recording format: WAV(16bit), sample rate:8/11/16/22/32/44.1KHz; MP3(128Kbps), sample rate: 44.1KHz.

Condor Mdr2 11 Bar